TECHNICAL SPECIFICATIONS

CAPACITY: : NW  Dia Holes upto 150 mtrs.   

ROTATION HEAD:   

  Max.  Output Torque : 70 kg. mtr.  @  300 RPM

 : 35 kg. mtr. @ 600 RPM

   FEED:   

  Max. pull up force : 3813 kg.

  Max. Pull down force : 2829 kg.

  Max. Pull up speed : 15 Mt / min.

  Multiplier : 1 : 2

   1 TON AUXILIARY WINCH:   

  Max. Lifting Capacity : 300 kg.

  Max. Lifiting speed : 50 mt / min

   MAST RAISING CYLINDER:   

  Number of Cylinders : 1 No.

  Max. Capacity of each cylinder : 11782 kg.

  Cylinder Specification : H175 Dia 100 / Dia 50 NCCM 800

HYDRAULIC LEVELLING JACKS:   

  Number of Cylinders : 4 Nos.

  Max. Capacity of each Cylinder : 11782 kg.

  Cylinder Specification : H175 Dia 100 / Dia 63 NCLM 610

   MUD PUMP:   

  Model : TSA – 75

  Capacity of Mud Pump : 205 LPM @ 20 Bar

   HYDRAULIC OIL COOLER:   

  Heat dissipation capacity : 40,000 K.cal / hr

  Max. Flow : 200 LPM

  Fan Speed : 1500 RPM

   POWER:   

  Capacity : 75 HP @ 2500 RPM

  Model : New Holland Tractor Engine

TRACTOR MOUNTED CORE DRILLING RIG 150-TM-CD

Drilling CapacIty

Top Head

Driving system

 RPM

 Max. Torque

Feed System

Driving System

 Max.pull down force

 Max.pull up force

Track Details

Track shoe width

 Track length

 Traction Motor

 Max.speed

 Gradability

165 dia x 35 mtrs

Hydraulic motor & GearBox.
0 – 100 RPM
600 kg.mt

Hydraulic cylinder & Multiplier
15000 kg
11000 kg

500mm
3120 mm
45 hp Motor on each track
1.6 km/h
30 deg.

6”CRAWLER MOUNTED BLAST HOLE DRILL

Drilling Capacity : 115 Dia x  30 Mtrs

Top Head   

Driving system : Air Motor with gear box

RPM : 0-60 RPM

HP : 6

Torque : 110 kg mt

Feed System :  

Driving System : Air Motor with gear box

HP : 6

Maximum Pull up/ Pull down : 2500 kg.

Boom Raising : Hyd. Cylinder

Optional

 Hydraulic Mast Raising         Hydraulic Mast Swing          Hydraulic Mast Dumping       Self Propulsion

WAGON DRILL

CAPACITY : : 105mm to 114mm dia holes using DTH method.

MOUNTING : Heavy Duty Crawler

ROTATION: : Hydraulic Motor & Spur Gear Box

Torque : 110 kg.mtr.

RPM : 0 to 60 RPM

Max Tramming Speed : 1.4 km/hr

Gradeability : 30%

Track Oscillation : Through Twin Hydraulic Cylinders

Dust Control : Hydraulically driven Water Injection system

HYDRAULIC SYSTEM : On Board 300 CFM @ 200 PSI IR Screw Compressor is powered by adequate diesel engine and the drive for hydraulic pump is from the Jack shaft of the air end.

Track : Shoe 13″ – Triple grouser;No. of Bottom Rollers 5 x 2 No. of Top Rollers 1 x 2

DIMENSION :  

Length : 7300mm

Width : 2900mm

Weight : 9.0 Tons

Height : 2.35 mtrs.

Rod Changer : Single Manual Rod Changer

Positioning : Boom Swing (Left/Right): 40/45 deg Boom Lift (Up/Down) : 45/30 deg Guide Swing (Left/Right) : 45/45 deg Guide Dump : 75 deg

BEC-TRACK-100-SELF CONTAINED CRAWLER DRILL

Technical Specifications
Model
Rated Pressure (bar)
Rated Rotation Speed (rpm)Torque
HP
Legs – Propelling Pressure (bar)
Legs – Extention (mm)
Water Pressure (bar)
Extension – Height (mm)
Retraction Height (mm)
Weight (kgs)
Drill Rod Size (mm

MYT 140
140
320
14 kg.mtr
8.550
1230/1850/2330
6-25
2490/3420/4140
1260/1570/1810
44/48/52
19/22

ROOF BOLTING MACHINE RBM-43

Capacity
Rig CarrierROTATION HEADMax. Output Torque
Max. Speed
H.P of Motor
Air Motor
Gear BoxFEED
Max. Pull up force
Max. Pull down force
Max. Pull up speed
H.P of Motor
Air Motor
Gear Box

MAST RAISING CYLINDER
Number of Cylinder
Operating System

MECHANICAL LEVELLING JACKS

OPTIONAL:
MAST DUMPING
Number of Cylinder
Mast Swiveling

Water Pump

5” Dia DTH Holes upto 60 mts in Hard formation
Skid Mounted Rig for under ground mines150Kg.mt
60 rpm
8 HP
4 cylinder Radial Piston Air Motor
Spur Reduction Gear Box1500 kg
1500 kg
10 mt/min
10 HP
4 cylinder Radial Piston Air Motor
Self locking worm & worm wheel reduction gear box,
Chain & tyre

1 No
Pneumatically operated hydraulic pump,
Directional control valve and hydraulic cylinder

4 Nos.

Hydraulically operated dumping arrangement for angle hole drilling upto 20 degrees.
1 No
Manually operated swiveling of 5 degrees on eighter sides of vertical
Hydraulically operated water pump
36 LPM @ 400 psi.

SKID MOUNTED RIG FOR UNDERGROUND MINES

It can be carried easily from place to place manually because of lesser weight